Yamaha Motor Corporation, USA 9.9A/15A — Yamaha Motor Corporation, USA 9.9A/15A User Manual

E EMU00991 ADJUSTING IDLING SPEED w 8 Do not touch or remove electrical parts when starting or during operation. 8 Keep hands, hair and clothes away from flywheel and other rotating parts while engine is running. c C This procedure must be performed while the outboard motor is in the water. A flushing attachment or test tank can be used. A diagnostic tachometer should be used for this procedure. 1) Start the engine and allow it to warm up fully in Neutral until it is running smoothly. If the outboard is mounted on a boat, be sure the boat is tightly moored.

2) Adjust the throttle stop-screw 1 to set the idling speed to specification (see “SPECIFICATIONS” on page 4-1) by turning the stop-screw clockwise to increase the idling speed, and turn- ing it counterclockwise to decrease the idling speed. NOTE: Correct idling-speed adjustment is only possible if the engine is fully warmed-up. If not warmed up fully, the speed setting will tend to be too high. If you have diffi- culty obtaining the specified idle, consult a Yamaha dealer or other qualified mechanic. 204021* q 4-13