Yamaha Motor Corporation, USA 9.9A/15A — Yamaha Motor Corporation, USA 9.9A/15A User Manual

E EML40010 CHECKING BOLTS AND NUTS 1) Check that bolts securing the cylinder head and engine and the nut securing the flywheel are tightened with their specified tightening torques. 2) Check the tightening torques of other bolts and nuts. EMU00409 MOTOR EXTERIOR EMU00410 Cleaning the Outboard Motor After use, wash the exterior of the out- board with fresh water. Flush the cooling system with fresh water. NOTE: Refer to Flushing Cooling System instruc- tions in “TRANSPORTING AND STORING OUTBOARD MOTOR”. 102031 Checking Painted Surface of Motor Check the motor for scratches, nicks, or flaking paint. Areas with damaged paint are more likely to corrode. If necessary, clean and paint the areas.

Consult a Yamaha dealer for touch-up paint. EML44010 COATING THE BOAT BOTTOM A clean hull improves boat performance. The boat bottom should be kept as clean of marine growths as possible. If necessary, the boat bottom can be coat- ed with an anti-fouling paint approved for your area to inhibit marine growth. Do not use anti-fouling paint which includes copper or graphite. These paints can cause more rapid engine corrosion. 102025 4-21