DRIVING & CHASSIS - MAINTENANCE HS120V G5:9HM:=FGH 8F=J=B;7 756=B 9B;=B9 9@97HF=7GMGH9A =B89L LF1W332A LF1W334A 7. Unscrew the front/rear axle case mounting nuts (1)(8EA), and then loosen the drive chains (2). During reassembly, apply liquid gasket (Three Bond 1206D or equivalent) on the mating surfaces, and tighten the mounting nuts to the specified torque sequentially in a diagonal order. LF1W333A 8. Unscrew the sprocket mounting bolt (1) from the inside of the main frame. When reinstalling the mounting bolt, apply the sealant (LOCTITE 271 or equivalent) on its threads and tighten it to the specified torque. LF1W335A Mounting nut(M16) tightening torque .........
30.8 ~ 34.0 kgf-m Mounting nut(M16) tightening torque ......... 30.8 ~ 34.0 kgf-m 3 -36 GMW-0035