OPERATION EXPLANATION OF COMPONENTS METER DISPLAY PORTION Pilot Display Gauges And Meter (1)Engine Pre-heating Monitor (3)Engine Coolant Temperature Gauge (2)Swift Deceleration Display Lamp (4)Fuel Gauge (5)Service Meter PILOT DISPLAY When the starting switch is ON, the pilot display lights up when the display items are functioning. ENGINE PRE-HEATING MONITOR This monitor lamp(1) indicates the pre-heating time required when starting the engine at an ambient temperature below 0°C (32°F). The monitor lamp lights when the starting switch is turned to HEAT position and goes off after about 18 seconds to show that the pre-heating is completed.
SWIFT DECELERATION DISPLAY LAMP This monitor(2) informs the operator that the swift deceleration function is being actuated. Actuated: Lights up Canceled: Goes out When the swift deceleration switch is pressed, the swift decel- eration display lamp lights up. When it is pressed again, the lamp goes out. REMARK When the swift deceleration display lamp is lighted up, the engine speed remains at low idling even if the fuel con- trol dial is operated. 3-7