Mack Trucks — Mack Trucks V-MAC IV Electronic Vehicle Management System Manual

V-MAC Co-Pilot Operator's Manual 33 AFTERTREATMENT SYSTEM PASSIVE REGENERATION (MANUAL) (IF AVAILABLE) Soot Load Level Level 1 Level 2 Level 3 Level 4 Action to Take Continue to drive and press and hold the top of the DPF Smart switch momentarily. Alternatively, park the vehicle in a safe location away from overhanging objects (park brake applied). Press and hold the top of the DPF Smart switch momentarily. Note: Failure to perform the regeneration will take the Aftertreatment System to Level 2. Continue to drive or park the vehicle in a safe location away from overhanging objects (park brake applied) and allow the engine to run and the regeneration to complete. Note:

Failure to perform the regeneration will take the Aftertreatment System to Level 3. Perform a parked manual regeneration IMMEDIATELY to avoid further engine derate and damage to the DPF. Note: Failure to perform the regeneration will take the Aftertreatment System to Level 4. A serious engine problem has occurred. Seek service immediately. Note: Parked regeneration is no longer possible for the operator. Regeneration Condition If moving manual regeneration is allowed to run, the following normal processes may be observed. • HEST indicator will turn off if vehicle speed is 16 km/h (10 mi/h) or higher. • DPF Smart switch indicator will shut off during the regeneration.

• Regeneration takes between 20 and 30 minutes to complete.