Mack Trucks — Mack Trucks V-MAC IV Electronic Vehicle Management System Manual

70 V-MAC Co-Pilot Operator's Manual Integrated Temp-A- Start (Optional; For Future Support) Integrated Temp-A-Start ( i TAS) is a fully integrated vehicle management and control (V-MAC) IV system designed to improve fuel economy by reducing unnecessary engine idling. When i TAS is enabled via a dash switch, the system will automatically start and stop the engine to maintain a minimum engine coolant temperature (ECT), minimum battery voltage, or a comfortable cab and sleeper interior. i TAS voltage and temperature settings are fully programmable through either VCADS software, and via the Co-Pilot instrument cluster display (if available and enabled). Note:

Safety overrides will prevent the system from activating if the transmission is in gear, the hood is up, or the parking brake is released. W2076082 Figure 29 Integrated Temp-A-Start Switch Speed Sensor Tamper Detection Speed sensor tamper detection is used to monitor and stop unauthorized tampering of the vehicle speed limiting function in order to gain additional top speed. If tampering is detected, the vehicle operator will be notified by a diagnostic trouble code (DTC). Engine power will be limited to a programmed percentage and will continue until the issue has been corrected. Note: Torque limiting will be inhibited if a driveshaft power takeoff (PTO) is enabled and active.