Mack Trucks — Mack Trucks V-MAC IV Electronic Vehicle Management System Manual

V-MAC Co-Pilot Operator's Manual 83 CO-PILOT® LAYOUT Screen Types The Co-Pilot® contains six types of display screens: Start-Up Screens — A group of screens that appear when the vehicle management and control vehicle management and control (V-MAC) IV system is energized. Individual Start-Up screens are discussed in more detail in . Menu Screens — A group of screens that appear with a menu selection depending on whether the vehicle is stationary or moving. Individual Menu Screens are discussed in more detail in . Anytime Screens — A group of screens that can be displayed to a driver at any time (whether the vehicle is moving or stationary).

Individual Anytime Screens are discussed in more detail in . Stationary Screens — A group of screens that is only accessible when the vehicle is stationary (Vehicle Speed = 0). These screen choices disappear from the stationary MAIN MENU screen when the vehicle begins moving and are replaced with the last anytime screen. Individual Stationary Screens are discussed in more detail in . Interrupt Screens — A group of special screens that appears during start-up or operation to notify the driver of certain critical information. When an Interrupt screen appears, the driver must do one of three things: 1 Key-in the requested information.

2 Press the Enter ( ) button to acknowledge the screen and turn off the warning and/or alarm. 3 Take appropriate action to correct the condition that triggered the alarm. For example, if the DRIVER ROAD SPEED ALARM screen appears, decelerate until the vehicle speed drops below the limit which triggered the alarm. Individual Interrupt Screens are discussed in more detail in . Optional Systems Screens — A group of special screens that are accessible depending upon availability. Individual Option Systems Screens are discussed in more detail in .