12 G Valve mechanism 1 Rocker shaft bracket 2 Rocker 3 Rocker shaft 4 Rocker bushing 5 Crankcase 6 Cylinder head 7 Cylinder head bolt 8 Push rod 9 Tappet 10 Camshaft A: From camshaft bushing No. 4 B: Oil reservoir C: To oil pan 01484 After lubricating rocker 2 , the camshaft bushings, and other components, oil enters oil reservoir B to lubricate the cams. 01485 G Check valve and oil jet 1 Piston 2 Oil jet 3 Check valve A: Main oil gallery An oil jet 2 is fitted in the lower part of the main oil gallery A for each piston. These oil jets cool the pistons 1 by injecting oil into them. Each oil jet is fitted with a check valve that opens and closes at specified oil pressure levels.
At low engine speeds, these check valves 3 close to maintain the required volume of oil in the lubrication system and prevent reductions in oil pressure. 01487 12-7