Caterpillar — Caterpillar 99709-68120 — user manual

12 [Installation] Clean the surface on oil filter head 4 that makes contact with oil filter 3 . Apply a film of engine oil to gasket area A of filter 3 . Screw oil filter 3 into oil filter head 4 until gasket area A touches the oil filter head. Tighten filter 3 by a further 1 1/8 to 1 3/8 of a turn. Fit oil filter drain valve 1 . Start the engine and check that no oil leaks from gasket area A . Check the engine oil level and add oil if necessary. 11602 12-11