STRUCTURE AND OPERATION G Fuel feed action A: Fuel drawn in B: Start of pressure feed C: End of pressure feed D: Inlet/outlet hole E: Lead 01824 As the plunger 6 rises and its lead E meets the fuel inlet/outlet hole D , fuel flows through the center of the plunger and is expelled from the inlet/outlet hole. Regardless of how much further the plunger rises, no fuel feed takes place thereafter. The stroke length F of the plunger 6 during which pressure feed takes place is known as the “effective stroke.” 01825 G Injection volume adjustment mechanism To match changes in engine loading, an adjustment mechanism controls the amount of fuel injected.
This mechanism turns the plunger 6 by a given angle, thereby altering the point at which the fuel inlet/outlet hole D meets the lead E . Simply stated, the effective stroke is made longer or shorter. A single control rack 7 is used to rotate every plunger in the engine, so the plungers rotate simultaneously and by the same angle. 01826 13-6