Caterpillar — Caterpillar 99709-68120 — user manual

13 13-9 Feed Pump 1 Priming pump 2 Inlet check valve 3 Gauze filter 4 Outlet check valve 5 Feed pump housing A: From fuel tank B: To fuel filter The feed pump is driven by the camshaft in the injection pump. The priming pump 1 enables fuel to be drawn up manually when the injection pump is stationary. It is particularly useful for air bleeding. The gauze filter 3 removes large impurities from fuel drawn up from the fuel tank and thus prevents clogging of the feed pump. It must be 14431 washed regularly in gas oil. G Suction stroke When the injection pump camshaft 6 forces up the push rod 7, fuel in the suction chamber C is compressed and opens the outlet check valve 4.

Most of the fuel forced out is drawn into the pressure chamber D below the piston. 13912 G Pressure feed stroke As the camshaft 6 turns and the cam loses its lift, the piston 9 is pushed down by the piston spring 8. The fuel in the pressure chamber D is thus forced out and fed toward the fuel filter. At the same time, the outlet check valve 4 closes and the inlet check valve 2 opens. As a result, fuel is again drawn into the suction chamber C. 13913 G Stoppage When pressure in the pressure chamber D exceeds a preset level, the piston spring 8 cannot push back the piston 9. The pump therefore stops operating, preventing pressure in the fuel filter from rising more than necessary. 13914 13914