TROUBLESHOOTING 13-12 Symptoms Possible causes Engine will not start Engine difficult to start Engine knocks Unstable engine output Insufficient engine output Engine maximum speed too high Unstable engine idling Engine stops soon after starting Engine does not reach maximum speed Engine will not stop Accelerator pedal too stiff Defective fuel supply Injection pump proper Sticky plunger Sticky control rack Sticky delivery valve Worn tappet Worn camshaft Poorly adjusted injection timing Worn plunger Defective delivery valve seat Excessively advanced injection timing Insufficient plunger slide stroke Broken plunger spring Defective sliding action in control rack Tappet worn or not sliding correctly Broken delivery valve spring Poor airtightness due to loose delivery valve holder Defective delivery valve operation Loose control pinion Plunger spring not seating correctly Delivery valve holder too tight Uneven injection volume to cylinders Fuel feed pump Gauze filter clogged Check valve not operating Sticky piston Sticky push rod Worn tappet Defective check valve operation Piston worn