RADIATOR G Disassembly sequence 1 Wire net 2 Shroud 3 Frame 4 Drain cock 5 Drain hose 6 Pressure cap 7 Radiator G Assembly sequence Reverse the order of disassembly. 16943 Service standards 14-10 Location Maintenance item Standard value Limit Remedy 6 Pressure valve opening pressure 69 ± 15 kPa (0.7 ± 0.15 kg/cm2) [10.0 ± 2.2 psi] – Replace 7 Radiator air leakage {with air pressure of 150 kPa (1.5 kgf/cm2) [21.8 psi]} 0 cc (0 cu.in.) – Correct or replace N Service procedure 6 Pressure cap inspection Measure the pressure valve's opening pressure. If the measurement does not conform with the standard value, replace pressure cap 6.
00194 7 Radiator inspection • Fit hose A and radiator cap tester B to the radiator upper tank. • Fit plug C to the lower tank, then immerse the radiator in a tank of water. • Using radiator cap tester B, apply the specified air pressure of 150 kPa (1.5 kgf/cm2) [21.8 psi], and check for air leakage. • If air leakage is apparent, correct or replace radiator 7. 07386