WATER PUMP [Press-fitting] Press-fit impeller 3 until its end face B is in line with end face A of water pump shaft 10 . C: Press NOTE Press-fit the impeller such that flange side D of water pump shaft 10 is the load receiving surface. 16930 Impeller-to-water pump shaft interference If the measurement does not conform with the standard value, replace the defective part(s). 10 3 CAUTION Even if the standard value is satisfied, reassembly must not be carried out more than twice. 16931 Flange [Removal] 4 A: Gear puller 16932 [Press-fitting] With a load of 9,810 N (4,000 kgf) [2,205 lbf], press-fit flange 4 until it touches bearing 6 . B: Press C: Cylindrical jig 16933 14-16