Caterpillar — Caterpillar 99709-68120 — user manual

ALTERNATOR G Removal sequence 1 Vacuum pipe 2 Oil return hose 3 Oil inlet hose 4 Adjust plate 5 V-belt 6 Alternator assembly P.54-18 7 Adjust plate * : Alternator bracket 16752 WARNING Before removing the alternator 6, be sure to disconnect the negative terminal of the battery and insulate it with a tape or something else. If the negative terminal is not disconnected, the battery voltage is always available at terminal B and is dangerous. 54-16 G Installation sequence Reverse the order of removal. G Adjustment after installation Adjust the tension of the V-belt 5.

Gr 14 Service standards Location Maintenance item Standard value Limit Remedy 6 Alternator output current (* When hot, when 27V is generated) 1500 rpm 24A or more – Check 2500 rpm 33A or more – 5000 rpm 37A or more – Regulator regulated voltage (5000 rpm, loads 5A or less) 28.5 ± 0.5V – Replace *: “When hot” refers to the state of the engine after 30 minutes of maximum output operation at 5000 rpm at a normal ambient temperature.