AIR COMPRESSOR to Piston rings [Removal and Installation] 33 30 01738 [Installation positions] Make sure that compression rings 30 to 32 and oil ring 33 are installed at the correct positions. Face the side on which the letter A ” has been stamped to the head of piston 36 . Locate each of compression ring ends B to D 120° apart from each other. B : 1st compression ring ends C : 2nd compression ring ends D : 3rd compression ring ends E : Side rail Position oil ring ends F at the center of the compression ring ends B , D . Install the side rail with its ends G 45° away from oil rings ends F .
18402 Installation of connecting rod and connecting-rod cap Align alignment marks A on connecting rod 40 and connecting-rod cap 41 . 41 40 01750 61-12