11 N Service procedure Rocker bushing and rocker shaft [Inspection] If any clearance exceeds the specified limit, replace the defective part(s). 14 2 01952 Rocker bushing [Removal] 12994 [Installation] Align the oil hole A in the rocker bushing 2 with the oil hole B in the rocker 5 . Position the notch C and seam D on the rocker bushing 2 as shown. Install the rocker bushing 2 into the rocker 5 from the chamfered side F . 12995 to Installing rocker shaft brackets and rocker shaft Rocker shaft brackets Be sure to fit the rocker shaft brackets 6 , 8 , 12 in their correct positions. 14 12 8 6 A : Oil hole B : Threaded hole (for M8 rocker cover bolt) C : Threaded hole (for M6 set screw) D :
No threaded hole 13023 11-17