11 11-49 Service standards Unit: mm (in.) Location Maintenance item Standard value Limit Remedy – Gear backlash Between No. 1 idler gear and crankshaft gear 0.08 to 0.15 (0.00315 to 0.00591) 0.35 (0.0138) Replace Between No. 1 idler gear and No. 2 idler gear 0.07 to 0.15 (0.00276 to 0.00591) 0.35 (0.0138) Replace Between No. 1 idler gear and drive gear 0.07 to 0.15 (0.00276 to 0.00591) 0.35 (0.0138) Replace Between No. 2 idler gear and camshaft gear 0.08 to 0.16 (0.00315 to 0.00630) 0.35 (0.0138) Replace 2. 3 No. 1 idler shaft-to-gear bushing clearance [Basic diameter:
37 mm (1.46 in.)] 0.01 to 0.05 (0.000394 to 0.00197) 0.2 (0.00787) Replace 4, 12 Idler gear end play 0.05 to 0.15 (0.00197 to 0.00591) 0.3 (0.0118) Replace 11, 13 No. 2 idler gear bushing-to-shaft clearance [Basic diameter: 32 mm (1.26 in.)] 0.01 to 0.05 (0.000394 to 0.00197) 0.2 (0.00787) Replace Tightening torques Unit: N·m (kgf·m) [lbf·ft] Location Parts to be tightened Tightening torque Remarks 1 No. 1 idler gear mounting bolt 88 (9) [64.9] – 5 Collar mounting nut 82 (8.4) [60.5] – 9 No. 2 idler gear mounting bolt 95 (9.7) [70.1] – Oils Location Points of application Kinds Quantity 6, 8 O-ring Engine oil As required