Caterpillar — Caterpillar 99709-68120 — user manual

11 11-63 Service standards Unit: mm (in.) Location Maintenance item Standard value Limit Remedy 9, 17 Main bearing Oil clearance [Basic diameter: 80 mm (3.15 in.)] 0.05 to 0.10 (0.00197 to 0.00394) 0.15 (0.00591) Replace Span when free – Less than 85.5 (3.37) Replace 16 Crankshaft bearing End play 0.10 to 0.25 (0.00394 to 0.00984) 0.4 (0.0157) Replace Bend 0.05 (0.00197) or less 0.1 (0.00394) Contact or replace Pin and journal Roundness 0.01 (0.000394) or less 0.03 (0.00118) Contact or replace Cylindricity 0.006 (0.000236) or less – Contact or replace 18 Distortion of crankcase top surface 0.07 (0.000276) or less 0.2 (0.00787) Replace Tightening torques Unit:

N·m (kgf·m) [lbf·ft] Location Parts to be tightened Tightening torque Remarks 1 Crankshaft pulley mounting bolt 185 (19) [136] – 3 Torsional damper mounting bolt 67 (8) [49.4] – 8 Main bearing cap mounting bolt 67 (8) [49.4] + 90° • Wet • Can be reused up to 3 times Oils and sealants Location Points of application Kinds Quantity 5 Crankcase mounting surface of front cover assembly Threebond 1207C As required 6 Front oil seal lip Engine oil As required 8 Bolt threads Engine oil As required 9, 17 Main bearing inside surfaces Engine oil As required