Safety Use Foldable ROPS and Seat Belt Properly If this tractor is equipped with a foldable ROPS, keep the ROPS in the fully extended and locked position. If the tractor is ever operated with ROPS folded (e.g., to enter a low building), drive with extreme caution. Do NOT use seat belt with the ROPS folded. Return the ROPS to the raised, fully extended and locked position as soon as the tractor is operated under normal conditions. Always fasten your seat belt when the ROPS is fully extended and locked. TS205 —UN—23AUG88 DX,FOLDROPS -19-31AUG99-1/1 Stay Clear of Rotating Drivelines Entanglement in rotating driveline can cause serious injury or death.
Keep tractor master shield and driveline shields in place at all times. Make sure rotating shields turn freely. Wear close fitting clothing. Stop the engine and be sure that PTO driveline is stopped before making adjustments, connections, or cleaning out PTO driven equipment. TS1644 —UN—22AUG95 H96219 —UN—29APR10 Do not install any adapter device between the tractor and the primary implement PTO drive shaft that will allow a 1000 rpm tractor shaft to power a 540 rpm implement at speeds higher than 540 rpm. Do not install any adapter device that results in a portion of the rotating implement shaft, tractor shaft, or the adapter to be unguarded.
The tractor master shield shall overlap the end of the splined shaft and the added adaptor device as outlined in the table. DX,PTO -19-30JUN10-1/1 05-4 030612 PN=13 PTO Type Diameter Splines n ± 5 mm (0.20 in.) 1 35 mm (1.378 in.) 6 85 mm (3.35 in.) 2 35 mm (1.378 in.) 21 85 mm (3.35 in.) 3 45 mm (1.772 in.) 20 100 mm (4.00 in.)