Additional Equipment Other Front Loader Installation - Front Loader Brackets CC1028532 —UN—01SEP06 Using a suitable hoist, position the front loader brackets on the main frame of the tractor and tighten the screws to the specified torque. Check the torque regularly; see Section 85, Lubrication and Periodic Service. front-loader brackets, use appropriate hardware only, as shown in the illustration above. Comply also with Operator's Manual and Installation Instructions of the front loader. A front loader checked and approved by John Deere is available for purchase.
When installing John Deere OULXBER,0001B56 -19-15NOV11-1/1 71-8 030612 PN=193 Hardware for John Deere front loader brackets Item Description Width across flats Torque Standard Thread Length Identification / Grade A Weight of front loader bracket, 100 kg (220 lb) - - - - - - B Cap screws (7 used) 30 mm 620 N•m (460 lb.-ft.) ISO4017 M20 x 2.5 60 mm (2.36 in.) 10.9 C Washers (7 used) - - - - 21.4 x 22 x 5 mm - Nuts (5 used) 30 mm - ISO4161 M20 x 2.5 - 10