John Deere OMAL171363 (7430 and 7530) — Wheel Retaining Bolts

Service / Every 250 Hours Hydraulic or Electro-Hydraulic Pick-Up Hitch Check torques of attaching bolts: Tighten cap screws (A) to 450 Nm (330 lb-ft). Tighten cap screws (B) to 265 Nm (190 lb-ft). LX1015619 —UN—08JAN97 OU12401,0000E39 -19-01JUL03-1/1 Check the Neutral Start Circuit Tractors with PowrQuad Plus or AutoQuad Plus transmissions 1. Move range-shift lever (A) to neutral. 2. Move the reverser lever (B) to "forward" or "reverse". LX1038393 —UN—08JUN06 LX1044984 —UN—28APR08 3. Start the engine and wait 6-7 seconds. The “N” display must light up. 4. Depress the clutch and engage any range. Slowly release the clutch pedal. The tractor must NOT start to move.

If it does, see your John Deere dealer immediately. A—Range-shift lever B—Reverser lever OU12401,00019C5 -19-26APR08-1/2 Tractors with AutoPowr 1. Move reverser lever (A) to "forward" or "reverse". 2. Turn key in main switch as far as it will go to the right. The starting motor must NOT turn over. If it does, see your John Deere dealer immediately. LX1041027 —UN—08JUN06 3. Repeat the test in the other direction of travel. A—Reverser lever OU12401,00019C5 -19-26APR08-2/2 95-6 030612 PN=226