John Deere OMAL171363 (7430 and 7530) — Check the Remote-Controlled Trailer Hitch for Wear

Service / Every 250 Hours Determine play (c) between trailer hitch and receiver. Specification Trailer Hitch and Rreceiver—Play.................................................................. max. 3.0 mm max. 0.12 in. LX1048786 —UN—09DEC09 OULXBER,0001966 -19-30AUG10-4/4 Check the Manually-Operated Hitch for Wear (Italy and Spain Only) CAUTION: Parts that have reached or exceeded their wear limit must be replaced with new parts. Check diameter (a) of the hitch pin. LX1031440 —UN—23SEP03 Check diameter (b) of the receiver hole. Specifications for Cat.

2 hitch pins with a nominal diameter of 28.0 mm (1.10 in.) Specification Hitch Pin—Wear Limit or Minimum Diameter..................................................................... 26.5 mm 1.04 in. Specification Top and bottom receiver holes (measured in direction of travel)—Wear Limit or Maximum Permissible Diameter....................................................... 31.0 mm (oval) 1.22 in. (oval) LX1031441 —UN—23SEP03 Specifications for Cat. 3 hitch pins with a nominal diameter of 43.0 mm (1.69 in.) Specification Hitch Pin—Wear Limit or Minimum Diameter..................................................................... 41.0 mm 1.61 in.

Specification Top and bottom receiver holes (measured in direction of travel)—Wear Limit or Maximum Permissible Diameter....................................................... 46.0 mm (oval) 1.81 in. (oval) LX24888,00005D4 -19-22FEB11-1/1 95-9 030612 PN=229