Controls and Instruments Performance monitor - settings Selection list (A) allows the implement/device to be selected that is required for calculating area. Implement width can be keyed in at cell (B). The service interval can be keyed in at cell (C). During the last 20 hours before reaching this interval a corresponding message will be displayed each time the tractor is started. After a service, the Since Reset hour-meter can be set back to zero at cell (D). LX1041070 —UN—11OCT06 Cell (E) gives access to the Performance Monitor - Calibration screen.
A—Implement/device selection B—Implement width C—Service interval D—Zeroing the value E—Next screen OU12401,0001CEA -19-16NOV09-13/16 Performance monitor - implement selection Manual recording can be started and stopped via a cell on the Performance Monitor - Totals screen. A hot key may also be used to perform this function (see Hot Keys - Selection of Functions). For automatic recording, the first implement that is activated starts the recording process. Recording is interrupted as soon as this implement is deactivated.
LX1041398 —UN—11OCT06 A—Manual recording B—Hitch C—Implement switch D—Power take-off (PTO) E—Automatic recording OU12401,0001CEA -19-16NOV09-14/16 Performance monitor - calibration Cell (A) gives access to the page shown below. A—Setting slip to 0 LX1041071 —UN—11OCT06 Continued on next page OU12401,0001CEA -19-16NOV09-15/16 15-15 030612 PN=46