John Deere OMAL171363 (7430 and 7530) — Switch for Turn Signal Lights and Horn

Lights Light Switches Light switch (A) can be set to the following positions: 1 = Egress light 2 = Light switch in position 3 = Parking lights 4 = Headlights "on" 5 = Headlights and worklights "on" LX1038317 —UN—27APR06 Switch headlights to “low beam” or “high beam” position by means of switch (B). Pull switch toward steering wheel = Headlight flasher (“flash-to-pass”) Switch in center = Low beam Push switch away from steering wheel = High beam Indicator light (C) will glow when headlight switch is in “high beam” position. NOTE:

If the egress light is activated at the CommandCenter (see “Worklights” in this Section), the headlights and any worklights that are activated come on for several seconds if the light switch is turned briefly to position 1 once or several times. LX1041415 —UN—11OCT06 Frequency of switch actuation Egress light "on" time L102655 —UN—15AUG94 Twice 120 seconds Once 90 seconds Three times 150 seconds Four times 180 seconds A—Light switch B—Switch for high-/low-beam headlights C—High-beam indicator OU12401,000158C -19-21NOV06-1/1 Operating the Hazard Warning Light Switch If any trouble is encountered on the tractor when driving on public roads, switch on the hazard warning light switch (A).

LX1036215 —UN—04NOV05 OU12401,0001403 -19-13MAY06-1/1 20-2 030612 PN=50