Operator's Cab Air-Conditioning (Tractors without ClimaTrak) Turn on air-conditioning at switch (A). Regulate the cooling at control (B). The cooling is increased by turning the knob counterclockwise. Set the fan and louvers as desired. LX1036232 —UN—19SEP05 IMPORTANT: To maintain consistently high performance, turn on the air-conditioning for two or three minutes every month, regardless of weather conditions or season (with engine at low idle). Control (B) should be set for maximum cooling. At ambient temperatures below 4°C (39°F), the cab should first be heated (using the heating system) so that the temperature inside the cab is as high as possible.
A—Air-conditioning switch B—Cooling regulator C—Switch for special operation NOTE: When switch (C) is activated, the air-conditioning operates without regard to ambient temperature. This is necessary in winter, when the air-conditioning has to be operated once a month, and when the system has to be operated in conjunction with the heater to dehumidify the cab. OU12401,00012CA -19-19SEP05-1/1 Tips on Using Air-Conditioning Preventing the windows from fogging up - Keep the fan running for a couple of minutes to dry the evaporator core NOTE: First check that the condensation drain is not blocked. 1.) During the day: Do not blow cold air at the windshield!
(do not use ”window” mode while running the air-conditioning at ”max. cool”). If you feel too cool with air-conditioning at ”max. cool”: - Keep the fan running - Turn the temperature control to a warmer position - Leave the air-conditioning on If you still feel too cold: - Keep the fan running - Turn the temp. control to a warmer setting (in the red zone) - Leave the air-conditioning on - If windows fog, slowly turn the temperature control to a ”cooler” position until the windows start to clear Before you stop the tractor: - Keep the fan running - Switch off the air-conditioning - Turn the temp.
control to a warmer setting or leave it if it already is at 2.) In the morning (if air-conditioning was in use the day before) During the first start-up - Set air-flow to ”footwell” - NOT to ”window”! - Run the fan - Turn the temp. control to ”max. heating” (in the red) - If you are not driving the tractor, it may help to open the cab door or window As soon as hot, dry air comes out the louvers: - Set air-flow to ”window” - this will defog the windows When the windows are clear:
- Set air-flow and temperature to a comfortable setting If ambient humidity is high or there is moisture inside the cab - With the temperature regulator set to ”warm”, switch the air-conditioning on at the dehumidify switch for special operation (cactus symbol). OU12401,00012CB -19-19SEP05-1/1 25-10 030612 PN=63