Break-in Period After the First 4 and 8 Hours of Operation Tighten rear wheel retaining bolts/nuts A—500 Nm (370 lb-ft) B—250 Nm (185 lb-ft) LX1047160 —UN—25SEP08 OU12401,0001AB9 -19-22SEP08-1/2 Tighten front wheel retaining bolts/nuts A—480 Nm (355 lb-ft) B—250 Nm (185 lb-ft) LX1038325 —UN—06MAY08 OU12401,0001AB9 -19-22SEP08-2/2 Within the First 100 Hours of Operation Wheel bolts Check torque at wheel retaining bolts frequently. The first oil and filter change must take place after the first 100 operating hours at the earliest but within the first 500 operating hours at the latest. Engine oil For the correct use of engine oil, see Section 80, FUEL, LUBRICANTS, HYDRAULIC OIL AND COOLANT.
OU12401,00019C8 -19-11AUG11-1/1 After the First 100 Hours of Operation The service jobs listed under “After the First 100 Hours” in Section 85, “Lubrication and Periodic Service” must be carried out. OU12401,00019C9 -19-06MAY08-1/1 30-1 030612 PN=74