John Deere OMAL171363 (7430 and 7530) — Comply with Operator's Manuals of Implement Manufacturers

Prestarting Checks Fuel filter If water or sediment deposits have settled in filter, proceed as follows: 1. Open bleed screw (A). 2. Open drain plug (B) by 3/4 of a turn. Retighten the plug as soon as water and sediment deposits have drained out. LX1041431 —UN—20NOV06 3. Open drain plug (C) by 3/4 of a turn. Retighten the plug as soon as water and sediment deposits have drained out. 4. Tighten bleed screw (A). 5. Turn key in main switch to the right to the first switch position so that the fuel transfer pump is operating. Keep the pump running for approx. 40 seconds.

If water was present in fuel filter, use a 1/2-inch square-section key to loosen drain plug (D) under the fuel tank by one turn. After draining off any water and sediment deposits, retighten drain plug until hand-tight. LX1031622 —UN—23JAN06 Other checks If the tractor is used to power external hydraulic equipment, check the level of the transmission/hydraulic oil every day. This check is described in “Service / Every 250 Hours”. A—Bleed screw B—Drain plug C—Drain plug D—Drain plug (fuel tank) If the tractor is used in particularly wet and muddy terrain, apply extra lubrication as follows: Lubricate front axle and front-wheel drive shaft.

Lubricate rear axle Lubricate three-point hitch Lubricate the pick-up hitch (if equipped). These jobs are described in “Service / Every 250 Hours” and “Service / Every 500 Hours”. OU12401,0001593 -19-24NOV06-2/2 Comply with Operator's Manuals of Implement Manufacturers CAUTION: Before operating the tractor in conjunction with a mounted implement or trailer, it is the responsibility of the operator to make himself familiar with the relevant Operator's Manuals. Operator errors may have serious consequences. TS201 —UN—23AUG88 Operator's Manuals and the safety decals on mounted implements and trailers provide important information on how to operate them safely.

For this reason, it is important to make yourself familiar with them before starting work. Operator's Manuals must be provided for all operators of the tractor. OULXBER,0001A5A -19-21FEB11-1/1 35-2 030612 PN=76