John Deere OMAL171363 (7430 and 7530) — Cold-Weather Starting Aids

Operating the Engine Starting the Engine CAUTION: Never operate the engine in a closed building. Make sure there is plenty of ventilation. Danger of asphyxiation! Before starting the engine, close the hood. LX1041458 —UN—18DEC06 1. Set selective control valve levers (A) to neutral position. 2. Set reverser lever (C) to neutral position (or to positions N or P on tractors with AutoPowr). 3. Turn key in main switch (D) one position to the right. Wait until light (E) goes out. 4. Turn key in main switch (D) clockwise to end position. As soon as engine starts, release key. Do not operate starting motor for more than 30 seconds at a time. Turn key in main switch to zero.

Wait at least one minute before attempting to start again. After starting the engine, wait 2 seconds before operating switches or controls since the electronic system of the tractor is checked. LX1044442 —UN—11DEC07 IMPORTANT: During the warm-up phase, operate the tractor at moderate load only. Once operating temperature has been reached (see temperature gauge), full power becomes available. NOTE: The engine control unit (ECU) allows the engine to run at a higher slow idle speed (1050 rpm) until coolant temperature reaches 20°C (68°F).

A—SCV Levers B—Hand Throttle C—Reverser Lever D—Main (Key) Switch E—Glow-Plug Indicator Light LX1041459 —UN—18DEC06 LX1036259 —UN—31MAY06 OU12401,0001CEB -19-17JUN10-1/1 40-2 030612 PN=78