John Deere OMAL171363 (7430 and 7530) — Travel Speeds, PowrQuad Plus Transmission (20/20)

Operating the Tractor General Select correct gear Always drive in the highest possible gear with reduced engine speed. Choose a gear so that engine speed (A) with engine under no load drops 150 to 250 rpm when the tractor is operating with the engine under load (B). LX1044954 —UN—09JAN08 NOTE: For light work, reduce engine speed below 2000 rpm. Select a gear so that engine speed drops 200 to 300 rpm when operating. OU12401,000197F -19-24DEC07-7/7 Select Correct Ground Travel Speed Number of gears on: PowrQuad transmission (40 km/h; 25 mph)*: 20 forward gears, 20 reverse gears AutoQuad transmission (Eco version) (40 km/h; 25 mph):

20 forward gears, 20 reverse gears PowrQuad transmission (50 km/h; 31 mph): 20 forward gears, 20 reverse gears * depending on legal requirements, the maximum speed may be limited to 35 km/h (21 mph) AutoQuad Plus transmissions have the same number of gears and the same travel speeds as the corresponding PowrQuad Plus transmission. Gears should be selected so as to avoid prolonged overloading of the engine. Ground travel speeds with engine running at rated speed are shown on the following pages. OU12401,00015A4 -19-05DEC06-1/1 Travel Speed Tables NOTE: The ground travel speeds shown in the following tables are theoretical.

The actual speeds vary with rolling circumference, load, tire pressure, make of tire, wheel slip etc. If the precise speed is required for specific applications, then it must be obtained by measurement. OULXE59,001089F -19-08MAY06-1/1 45-3 030612 PN=87