Faults Fault code Id code Brief description Description 2.1.EE LBS mounted implement Fault in LBS ECU 2.1.EF LBS mounted implement 3.1.01 A004 Side Console RAM, Injection pump 1.2.DE A002, A021 EDC Control Module , EST Comfort Module missing Control Module 1.2.E0 A021, A002 EDC Control Module , EST Comfort Module Module 1.2.E1 (B014 - sensor, (running on) 1.2.CB A021, A020 EDC Control Module, Pump Control (Injection pump) 1.2.CD A021, A020 EDC Control Module, Pump Control (Injection pump) 12/1999 0000 000001 B b 9/47 Capitel Docu-No. Index Date Version Page Vario Tractors - Failure Codes 12/1999 Date b Version 9/47 Page Vario Tractors - Failure Codes 0000 Capitel B Index 000001 Docu-No.
Fault code Id code Brief description Description Consequences Link FENDIAS / Note 1.2.CB A021, A020 EDC Control Module, Pump Control (Injection pump) CAN Message failure to Injection pump Engine runs idle, Chapter 2000 Reg.B (EDC-Failure) Electric diagram "EDC Control " 1.2.CD A021, A020 EDC Control Module, Pump Control (Injection pump) Speed failure of CAN Message Between Injection Pump and EDC Control Module restricted Power, Chapter 2000 Reg.B (EDC-Failure) 1.2.DE A002, A021 EDC Control Module , EST Comfort Module Speed of CAN Message missing restricted operation, Chapter 2000 Reg.B (EDC-Failure) 1.2.E0 A021, A002 EDC Control Module , EST Comfort Module Communication failure during CAN - Message between EDC Control Module and EST Contol Module Chapter 2000 Reg.B (EDC-Failure) Electric diagram "EDC Control ", Transmission - BUS 1.2.E1 Fault in speed signal (B014 - sensor, accumulator shaft, B015 - sensor - bevel pinion) or PTO is driving engine (running on) Fault display, Chapter 2000 Index B (EDC fault) 2.1.EE LBS mounted implement Fault in LBS ECU Mounted implement can no longer be operated via joystick controls or terminal.
2.1.EF LBS mounted implement Depending on implement manufacturer / restricted operation of mounted implement For fault description, please see implement manufacturer´s lliterature 3.1.01 A004 Side Console RAM, EEPROM - Failure Functions switched off: - keypad, - digital / analogue input, - LED actuation Fit new control console Faults