PRODUCT OVERVIEW 12/05 Meters Note: The LCD on the instrument panel show hourmeter, display brightness and battery voltage. Indicators and Alarms (Optional) When a sensor detects a problem during operation, the indicator on the instrument panel will light and an alarm will sound. Indicators are located on the instrument panel and the alarms are located on the back of the panel. Under normal operating conditions, the indicators are off. When the alternator output is too low, the indicator will light. When charging begins, the indicator will turn off.
Battery Low Charge Indicator Coolant High Temperature Indicator and Alarm When coolant temperature reaches the maximum allowable temperature (95°C [203°F] or higher), the indicator will light and the alarm will sound. Continuing operation at temperatures exceeding the maximum limit will result in damage and seizure. Check the load and troubleshoot the cooling system. Engine Oil Low Pressure Indicator and Alarm When the engine oil pressure falls below normal, the oil pressure sensor will send a signal to the indicator, causing it to light and the alarm to sound. Stop operation to avoid damage to the engine. Check the oil level and troubleshoot the lubrication system.
Water in Sail Drive Seal Indicator and Alarm When water is detected between the seals of the sail drive, the indicator will light and the alarm will sound. YM Series Operation Manual 19 Instrument Function Tachometer Shows engine rotation speed. Hourmeter Shows number of operating hours. Can be used as a guide for periodic maintenance checks. The hourmeter is located at the bottom of the tachometer. Panel Lights When the power switch is pushed, the gauges will illuminate for easier viewing.