Kaiyi UDRF01.04GB — 4.8 Temperature control, filtration and brake fluid

4 Brakes – 4.8 Temperature control, filtration and brake fluid 13 4.8 Temperature control, filtration and brake fluid page Temperature control, cleaning and brake oil, function description The brake system is cooled with oil that circulates through a cooler. The cooler has a temperature-controlled electric fan that counter- acts overheating. Temperature control consists of brake oil tank, brake oil pump, brake oil filter, accumulator charging valve, wheel brake units, cool- er, cooling fan, sensor brake oil temperature and thermal by-pass valve. The brake oil pump pumps oil (from the tank) which is cleaned in the oil filter.

When the accumulators are charged, the accumulator charging valve controls oil through the drive axle's brake units and cools the brakes. The oil passes through the cooler back to tank. An electric cooling fan increases the air flow through the cooler when the temperature needs to be lowered. A thermal by-pass valve leads the hydraulic oil past the cooler if the oil's temperature is too low. The temperature sensor controls activation of fan and temperature warning on the display.

11 D795 D D 9 D797-F C C 3 4 2 P T 5 1 6 10 M 7 004274 8 1 Brake oil pump 7 Thermal by-pass valve 2 Brake oil filter 8 Temperature sensor (B762) 3 Accumulator charge valve 9 Control unit frame front (D797-F) 4 The oil cools the wheel brake 10 Cooling fan (M674) UDRF01.04GB Maintenance manual DRF 400–450