4 Brakes – 4.8.11 Breather filter 15 4.8.11 Breather filter page Breather filter, changing 1 Clean the area around the brake tank's breather filter. 2 Remove cover from the filter holder. Remove the screw in the middle and lift away the cover. 3 Remove the old filter cartridge. 4 Clean the filter holder. NOTE Work carefully so that impurities do not enter the tank. 5 Fit a new filter cartridge. 1. Filling point, oil for brake system 2. Breather filter, brake oil tank 6 Refit the cover to the filter holder. 4.8.12 Brake oil filter page Brake oil filter, changing WARNING Hot, pressurized oil.
Personal injury, burn injury, rash or irritation Always depressurize the hydraulic systems before starting to work in the hydraulic systems. Avoid skin contact with the oil, use protective gloves. NOTE The filter protects the brake system from impurities. It is very important that new impurities do not enter the brake system when changing the filter. NOTE The filter holder is heavy, loosen it carefully. 1 Machine in service position, see section B Safety . 2 Depressurize the hydraulic and brake systems, see section B Safety . NOTE Leave the valve open when changing. 3 Remove the cover plates from over the engine compartment. UDRF01.04GB Maintenance manual DRF 400–450