4 Brakes – 4.8.14 Oil brake system 17 4.8.14 Oil brake system page Oil brake system, changing WARNING Hot, pressurized oil. Personal injury, burn injury, rash or irritation. Always depressurize the hydraulic systems before starting to work in the hydraulic systems. Avoid skin contact with the oil, use protective gloves. 1 Machine in service position, see section B Safety . 2 Depressurize the hydraulic and brake systems, see section B Safety . 3 Place a receptacle under the brake oil tank. The tank holds ap- prox. 140 liters. 4 Clean the area around the drain plug. 5 Remove the drain plug and drain the tank. 6 Fit the drain plug, use a new gasket washer.
7 Clean the area around the filling point. 1. Filling point, oil for brake system 2. Breather filter, brake oil tank 8 Remove the filler cap and fill the tank with oil. For volume and grade, see section F Technical data . 9 Check that the drain plug seals tight. 10 Remove the receptacle. Handle the oil as environmentally haz- ardous waste. UDRF01.04GB Maintenance manual DRF 400–450