Kaiyi UDRF01.04GB — 7.2 Lifting/lowering

4 7 Load handling – 7.2 Lifting/lowering 7.2 Lifting/lowering page Lift and lower, function description Lift and lower means to angle the boom up and down so that the at- tachment is lifted and lowered. The lift boom is angled with two lift cylinders that are pressurized by Control valve lift, lower and exten- sion. The lift function is controlled with Control lever (S815). 001109 Damping Damping means that the speed of functions is reduced automatical- ly near the end-positions. This results in less stress on the mechan- ical parts when stopping in the end-positions. Position sensors sense when damping should be activated.

When damping is activated, the control unit in question reduces the con- trol current to the solenoid valve for that function. Regeneration To increase the speed, oil from the rod side (2) is reused to the piston side (1), this is called regeneration. Engagement of regeneration is controlled by the control system. 1 2 000455 UDRF01.04GB Maintenance manual DRF 400–450 Condition Reference value Control switch Not activated Twistlocks Locked or unlocked, not intermediate position Overloading system Boom up: passive Boom down: passive or by-pass activated Alignment Boom down: no alignment