16 7 Load handling – 7.4.6 Sideshift frame 6. Solenoid valve tilt (Y6010 and Y6011) 17. Sensor twistlocks (B7202L/R and B7203L/R) 7. Solenoid valve rotation (Y6008 and Y6009) 18. Lock cylinder twistlocks 8. Solenoid valve sideshift (Y6020 and Y6021) 19. Spreader boom 7.4.6 Sideshift frame page Glide plates sideshift frame, checking 1 Remove cover plate, spacer plate and glide plate. 2 Measure glide plate's thickness. Thickness should be at least 25 mm . 3 Check the glide plate's clearance by measuring the distance be- tween the glide plate and the edge for the cover plate. Clearance should be 1 mm . Fit/remove spacer plates until the distance is correct. 4 Fit the cover plate.
5 Repeat steps 1–4 on the other glide plates. Illustration shows measuring without glide plate. UDRF01.04GB Maintenance manual DRF 400–450