7 Load handling – 7.5 Positioning 21 page 30-foot stop, function description 30-foot stop is an option for spreading that is activated with Switch stop at 30’ or 35’. When the 30-foot stop is activated, spreading stops at 30 feet. Two inductive position sensors indicate the position of the spreader beams and activates damping. For 30-foot stop, two sensors are used to control the stops. D 1 2 30-35 + 3 D D790-1 D D791-1 5 7 D 6 4 004864 1. Control lever (S815-T1.2 and S815-T4) 5. Control unit attachment (D791-1) 2. Switch stop at 30’-35’ (S1004) 6. Sensor end-position 20’-40’ (Y769) 3. Control unit cab (D790-1) 7. Servo valve spreading out (Y6018) or Servo valve spreading in (Y6019) 4.
Sensor, end-position 30’ (B777-3) Hydraulic diagram top lift Hydraulic diagram top lift, tilt lock and controllable tilt Hydraulic diagram combi attachment Hydraulic diagram top lift, tilt lock, controllable tilt and hydraulic lev- elling UDRF01.04GB Maintenance manual DRF 400–450 Condition Reference value Control switch Not activated Twistlocks Unlocked or by-pass activated Overloading system Passive