28 7 Load handling – 7.6 Rotation 4. Solenoid valve, engagement of hydraulics for top lift (Y6003) 10. Valve block hydraulic motor 5. Shuttle valve 11. Rotation motor 6. Hydraulic oil pump Hydraulic diagram top lift Hydraulic diagram top lift, tilt lock and controllable tilt Hydraulic diagram combi attachment Hydraulic diagram top lift, tilt lock, controllable tilt and hydraulic lev- elling page Rotation stop, function description Rotation stop is an option for the function rotation that interrupts ro- tation at ± 25 ° rotation from the middle position. To rotate the attach- ment more, the function must be by-passed with Switch rotation stop (S1014).
Rotation stop uses a position sensor that indicates when rotation is ± 25 ° , this is used to interrupt rotation. 2 1 D D790-1 3 D 7 D797-R D791-1 6 D 5 4 004865 1. Switch rotation stop (S1014) 5. Sensor rotation stop (B7225) 2. Control lever (S815-P3) 6. Control unit attachment (D791-1) 3. Control unit cab (D790-1) 7. Control unit frame rear (D797-R) UDRF01.04GB Maintenance manual DRF 400–450 Condition Reference value Control switch Not activated Overloading system Passive