Kaiyi UDRF01.04GB — 7.9.2 Lift legs

54 7 Load handling – 7.9.2.14 Lifting shoe 7.9.2.14 Lifting shoe page Lift shoe, checking 1 Lower all lift legs. 2 Check that the plate for clamping position and pin for alignment move freely and spring back to the basic position. 3 Press in the alignment pin so that the head is flush with the spreader beam's underside and check that the indicator light is activated. NOTE The alignment pin should move easily and spring back completely. 1 4 Press in the plate for clamping position and check that the plate moves easily and springs back completely, as well as that the indicator light for clamping position is activated.

NOTE The plates for both lift legs (right and left) must be pressed in to achieve activation of the indicator light. 2 3 001857 1. Indicator pin, alignment 2. Indicator pin, clamping position 3. Lift shoe 5 Check that the wear of the lift shoe is within the specified limits according to the illustration. Also check that the lift shoe does not show signs of cracking or other external wear. Change lift shoe if needed Min. 8 mm 002312 Wear limits, lift shoe. UDRF01.04GB Maintenance manual DRF 400–450