Kaiyi UDRF01.04GB — 8 Control system

4 8 Control system – 8 Control system Function keys The function keys (A) are used to navigate in the menu system. Also used to enter values in the system, change light contrast in keys/in- dicator panel and to confirm alarms. 000055 Function key 1: Scroll counter-clockwise in menu system as well as enter value 1. Function key 2: Scroll clockwise in menu system as well as enter value 2. Function key 3 (Reset): Abort selection of menu/session in progress as well as enter value 3. Confirm alarm. Function key 4: Enter value 4, gradually adjust settings (for ex- ample, contrast in guide lights for function keys) and gradually change values in operating menus. Function key 5:

Enter value 5, gradually adjust settings (for ex- ample, contrast in guide lights for function keys) and gradually change values in operating menus. Function key 6 (Return): Confirm selection of menu and sub- menu, as well as confirm entered value. Operating menus When the machine is started the Operating menu engine and trans- mission is shown on the display. This menu is shown until another menu is selected or an event-controlled menu is shown (e.g., in case of error code of type "WARNING" and "STOP"). Other menus (see list below) are scrolled with the function keys 1 (arrow left) and 2 (arrow right). 2 1 The following operational menus are accessible for assisting opera- tors:

Operating menu engine and transmission Operational menu, engine Operating menu transmission and hydraulics 004732 Operating menu electrical system Example of operating menus Service menu Operating menu heating and air conditioning Operating menu statistics Operating menu, dynamic scale Operating menu checking dynamic scale Operating menu load handling Operating menu service interval Operating menu printer Operating menu code lock UDRF01.04GB Maintenance manual DRF 400–450