10 9 Frame, body, cab and accessories – 9.2 Protection and emergency equipment 9.2 Protection and emergency equipment page Protective and emergency equipment, description A good working environment has protective and warning equipment to make the operator's work safer. The machine may be equipped with the following equipment: 1. Back-up alarm 2. Rotating beacon 3. Horn 4. Electric air horn 5. Fire extinguisher Fire extinguisher may also be located on the outside. If the machine is equipped with a fire extinguisher it should be of the type ABE acc. to EN 3 part 1, 2, 4 and 5. With such a fire extinguisher it is possible to extinguish fires in both solid organic materials and fluids.
Adapted fire fighting equipment is available for order from Kalmar Industries. 6. Seat belt For a cab with cab lift and lower, there is always a seat belt as well as safety chains by the doors. 7. Buzzer to indicate alarm/forgotten action, e.g., if the operator has leaves the cab without first applying the parking brake. 8. TV camera with monitor Used to give improved visibility to the rear when operating the machine. The monitor is located inside the cab on the left side. 7 2 4 1, 8 3 5 6 000512 UDRF01.04GB Maintenance manual DRF 400–450