Kaiyi UDRF01.04GB — 9.10.5 Vertically adjustable cab

28 9 Frame, body, cab and accessories – 9.10.5 Vertically adjustable cab page Hydraulic cab movement (sliding cab), component position 2 5 4 1 3 6 1 6 2 5 3 4 001862 1. Sensor damping (trailing edge of cab on left side) 2. Indicator plate damping 3. Chain sliding cab 4. Hydraulic motor sliding cab 5. Control valve sliding cab 6. Indicator plate damping 1. Load signal (LS) 000624 2. Pressure supply (P) 3. Tank return (T1) 4. Connection hydraulic motor (B) 5. Tank return (TP) 6.

Connection hydraulic motor (A) 9.10.5 Vertically adjustable cab page Cab lift and lowering, function description Cab lift and lowering means that the cab can be raised or lowered hydraulically during operation to improve the operator's visibility. The cab's height is adjusted with a hydraulic cylinder in a frame that secures the cab. The cab can be secured in raised position with two safety locks. For safety reasons, the machine's speed is reduced and the trans- mission is blocked in second gear when the cab is lifted. Damping Damping means that the speed of functions is reduced automatical- ly near the end-positions.

This results in less stress on the mechan- ical parts when stopping in the end-positions. Position sensors sense when damping should be activated. When damping is activated, the control unit in question reduces the con- trol current to the solenoid valve for that function. UDRF01.04GB Maintenance manual DRF 400–450