Kaiyi UDRF01.04GB — 10.6 Temperature control, cleaning and hydraulic oil

12 10 Common hydraulics – 10.6 Temperature control, cleaning and hydraulic oil 10.6 Temperature control, cleaning and hydraulic oil page Temperature control, cleaning and hydraulic oil, function description The hydraulic system's oil is cooled and cleaned by a separate pump circulating the oil through cooler and filter. The cooler has a temper- ature-controlled fan which counteracts overheating. The temperature control consists of hydraulic oil tank, hydraulic oil pump, hydraulic oil cooler, cooling fan, hydraulic oil filter, fine filter, sensor hydraulic oil temperature and by-pass valve.

The hydraulic oil pump pumps oil (from the tank) that is cooled in the hydraulic oil cooler and is cleaned by the oil filters in the tank. Some of the oil is filtered by the fine filter. An electric cooling fan increased the air flow through the cooler when the temperature needs to be lowered. A by-pass valve leads the hydraulic oil past the cooler di- rectly to the tank if the resistance through the cooler and filters be- comes too high. The temperature sensor controls activation of fan and temperature display on the display. 1. Hydraulic oil pump 2. Cooler hydraulic system D795 9 3. Temperature sensor (B776) 4. Control unit frame rear (D797-R) D797-R 5. Cooling fan (M668) D D 4 6.

Hydraulic oil filter 5 M 7. Fine filter 2 8. By-pass valve 9. Control unit KID (D795) 8 1 7 6 3 005011 UDRF01.04GB Maintenance manual DRF 400–450