Kaiyi UDRF01.04GB — 10.6.7 Hydraulic oil filter

10 Common hydraulics – 10.6.7 Hydraulic oil filter 15 3 Remove the cover plates (position 1) over the hydraulic oil fil- ters. 4 Have a receptacle ready to collect any oil spills. 5 Lift up the filter unit and place it in the receptacle. Let the hy- draulic oil drain. 6 Part the filter unit and remove the filter cartridge. Handle the fil- ter cartridge as environmentally hazardous waste. Note place- ment of the parts. 1. Cover plate for oil filter 2. Filler plug for hydraulic oil 3. Level glass, hydraulic oil 4. Filler plug for hydraulic oil 5. Breather filter, hydraulic oil tank 7 Clean the filter holder's parts. Be especially thorough with the magnetic rod.

8 Fit the new filters and assemble the filter units. 9 Fit the filter units and the cover plates. Tighten the bolts cross- wise. 10 Check the oil level in the hydraulic oil tank. The oil level should be at the top of the level glass. Top up if needed. NOTE The hydraulic oil level is checked with the boom complete- ly lowered and retracted. UDRF01.04GB Maintenance manual DRF 400–450