16 B Safety – Environment Environment page General Ever-increasing industrialisation of our world is having a significant impact on our global environment. Nature, animals and man are sub- jected daily to risks in connection with various forms of chemical handling. There are still no environmentally safe chemicals, such as oils and coolants, available on the market. Therefore, all who handle, per- form service on or repair machines must use the tools, assisting de- vices and methods necessary to protect the environment in an environmentally sound manner. By following the simple rules below, you will contribute to protecting our environment.
Recycling Deposit discarded materials for recycling or destruction. Environmentally hazardous waste Components such as batteries, plastics and other items that may constitute environmentally hazardous waste must be handled and taken care of in an environmentally safe and sound manner. Discarded batteries contain substances hazardous to personal health and the environment. Therefore, handle batteries in an envi- ronmentally safe manner and according to national regulations. Oils and fluids Oils freely discharged cause environmental damage and can also be a fire hazard. Therefore, when emptying and draining oils or fuel, take appropriate action to prevent unnecessary spills.
Waste oils and fluids must always be taken care of by an authorised disposal company. Pay close attention to oil leaks and other fluid leaks! Take immediate action to seal the leaks. Air conditioning system The refrigerant in the air conditioning system for the cab adds to the greenhouse effect and may never be intentionally released into open air. Special training is required for all service work on the air condi- tioning system. Many countries require special certification by an authority for such work.
Working in a contaminated area Used cab and engine air filters from machines operating in condi- tions with asbestos dust, or other hazardous dust, must be sealed in air-tight plastic bags before being deposited in the designated area. The machine must be equipped for work in a contaminated area (en- vironmentally contaminated or hazardous to personal health) before work is started. In addition, special local regulations apply when handling and servicing such a machine. UDRF01.04GB Maintenance manual DRF 400–450