4 D Error codes – Error codes page Reading out error code NOTE In case of an error code, perform the recommended actions ac- cording to the error code table to find the problem. Error codes are stored as active or inactive. Active errors are shown in the error code menu. Always use error code menus for reading out error codes, oth- erwise there's a risk of missing error codes. 1 Turn the start key to position I. WARNING Risk of machine damage. In case of error codes of level “WARNING” and “STOP”, serious machine damage may result if the engine is started. Do not start the engine until the cause of the error code has been identified or repaired. 2 Navigate to the service menu and press Enter.
3 Safety menu is shown. Hold Enter pressed in for at least two seconds. 001998 4 The error code list is shown on the display. Active error code is shown on display where field C shows error code number to- gether with X(Y). X shows sequence number for shown error code and (Y) shows number of active error codes. Scroll between error codes with key 1 and 2 (arrow function). Error codes disappear from list when the cause has been re- paired. UDRF01.04GB Maintenance manual DRF 400–450 000056 1 2 3 4 5 000060 1 2 3