Kaiyi UDRF01.04GB — Error codes engine alternative Volvo

14 D Error codes – 1 Engine UDRF01.04GB Maintenance manual DRF 400–450 Descrip- tion Limitation Action Con- nec- tion and com- ponent Diag- nostic menu Function group Code Volvo code 637/3 18 DTC 2.4 Sensor en- gine rpm, flywheel. Abnormal frequency. Engine is ex- tremely diffi- cult to start and runs rough, if it runs. Check that sensor is in- stalled correctly and con- nected. Check cabling between control unit and compo- nent. Check the sensor. D794/ Black:30, D794/ Black:31 - 1.9.2. Sensor engine rpm 637/8 18 DTC 2.4 Sensor en- gine rpm, flywheel. Abnormal frequency. Engine is ex- tremely diffi- cult to start and runs rough, if it runs.

Check that sensor is in- stalled correctly and con- nected. Check cabling between control unit and compo- nent. Check the sensor. D794/ Black:30, D794/ Black:31 - 1.9.2. Sensor engine rpm 639/ 11 38 DTC 6.5 Communi- cation er- ror with Control unit engine (D794), configura- tion error. Engine off: engine can- not be start- ed. Engine on: engine goes to idle and can only be stopped with emergency stop. Check that the 8-pin con- nector isn't damaged. Check that cables between CIU and engine's control unit aren't damaged. Check that connection 11 and 12 in CIU-connector are intact. Check connection 1 and 2 in the red connector on the engine's control unit.

D794/ Red:1, Red:2 CAN/ POWER, menu 2 1.6.3 CAN-bus drivetrain 639/ 12 38 DTC 6.5 Communi- cation er- ror with Control unit engine (D794), configura- tion error. Engine off: engine can- not be start- ed. Engine on: engine goes to idle and can only be stopped with emergency stop. Check that the 8-pin con- nector isn't damaged. Check that cables between CIU and engine's control unit aren't damaged. Check that connection 11 and 12 in CIU-connector are intact. Check connection 1 and 2 in the red connector on the engine's control unit. D794/ Red:1, Red:2 CAN/ POWER, menu 2 1.6.3 CAN-bus drivetrain