Kaiyi UDRF01.04GB — Error codes engine alternative Cummins

D Error codes – 1 Engine 23 page Error codes engine alternative Cummins UDRF01.04GB Maintenance manual DRF 400–450 Descrip- tion Limitation Action Con- nec- tion and com- po- nent Diag- nostic menu Function group Code Cum- mins code 84/10 242 Electric mal- function sen- sor speed, manipulation of signal de- tected. Engine rpm re- stricted to max rpm without gear. Check cabling between Control unit and compo- nent. Check component. - - 1.9 Control system en- gine 84/2 241 Electric mal- function sen- sor speed, data invalid. Engine rpm re- stricted to max rpm without gear. Check cabling between Control unit and compo- nent. Check component.

- - 1.9 Control system en- gine 91/19 287 Communica- tion error with Control unit cab (D790-1), electric mal- function throt- tle pedal. Engine only runs at idle. Use diagnostic menu to lo- calize incorrect segment - CAN/ POWER, menu 2 1.9 Control system en- gine 91/3 131 Electric mal- function throt- tle pedal, cable short- circuited to voltage. Engine doesn't respond to throttle appli- cation. Check cabling between Control unit and compo- nent. Check component. - - 1.1.2 Throt- tle pedal 91/4 132 Electric mal- function throt- tle pedal, cable short- circuited to ground. Engine doesn't respond to throttle appli- cation. Check cabling between Control unit and compo- nent. Check component.

- - 1.1.2 Throt- tle pedal 91/8 147 Electric mal- function throt- tle pedal, frequency too low. Engine doesn't respond to throttle appli- cation. Check cabling between Control unit and compo- nent. Check component. - - 1.1.2 Throt- tle pedal