Kaiyi UDRF01.04GB — Preventive maintenance, work instructions

C Preventive maintenance – Preventive maintenance 3 mm mm mm mm Preventive maintenance page Preventive maintenance, general It’s very important that preventive maintenance is performed ac- cording to recommended intervals. Preventive maintenance should be performed by Kalmar Industries, or by a service organization authorized by Kalmar Industries. CAUTION The warranty is not valid if service intervals are not followed. Preventive maintenance shall be performed accord- ing to the prescribed intervals and extent. Use spare parts, oils and fluids approved by Kalmar Industries.

page Preventive maintenance, work instructions 1 For new machine it is very important to check-tighten the wheel nuts during the first work week, until they are securely tightened. This shall be performed at an interval of 4–5 operat- ing hours (up to approx. 40–50 operating hours). 2 For new machine, checking actions shall be performed after 50 hours of operation, see 50h-check page 5 . Note completed 50h check in the service log, see Check and service log page 4 . 3 Service at regular intervals shall be performed according to service schedule, see Service schedule page 7 . The service schedule shall be followed to ensure the machine’s high oper- ating reliability.

Note completed service in the service log, see Check and serv- ice log page 4 . UDRF01.04GB Maintenance manual DRF 400–450